Complete Sno-Tek 28 Snow Blower Specs
28
-inch
intake width
Are You Sure It Is Your Best Choice? Check These:
| Basics | |
|---|---|
| Main sub-category | Gas snow blower cheaper than $500 |
| Intake Specs | |
| Intake dimensions | 28-inch wide x 20-inch deep (height) |
| Blower type | 2-stage (Dual-stage) |
| Auger Style | Serrated |
| Auger material | Steel |
| Impeller Diameter | 12" |
| Impeller Blades | 3 |
| Skid Shoes | Steel reversible |
| Performance | |
| Throwing Distance | 40 feet |
| Engine Make | Sno-Tek |
| Cylinder displacement | 208 cc |
| Fuel Tank Capacity | 0.79 gal. (Or 3L / 2.9 qts.) |
| Starter type | Electric or recoil |
| Chute / Deflector | |
| Chute Material | Polymer |
| Chute Rotation | 205 ° |
| Propulsion & Control | |
| Forward Speeds | 6 |
| Reverse Speeds | 2 |
| Interlock system | Single-hand |
| Drive system type | Disc-o-matic |
| Wheel type | Polar Trac |
| Axle system | Pin lock |
| Tire Size | 15 x 5 inches |
| Panel Type | All-steel |
| Other Specs & Features | |
| Manufacture product ID | 920403 |
| Warranty | 2 years |
| Commercial warranty | 0.25 years |
| Release year | 2010 |
| Release month | 05 |
| Physical Specs | |
| Weight | 189lbs. |
Description:
Sno-Tek outfitted this dual-stage snow blower with a small 208cc Sno-Tek engine and labelled its throwing distance at an above-average up to 40-feet. Equipped with a 3-blade 12-inch freeze-resistant impeller, it also features steel-serrated augers, a top-load aluminum gear case, an all-steel dash-panel, and a polymer chute with a remote deflector. The clearing width is 24-inches and it rolls on 15" x 5" Polar Trac tires.
Also known as: Sno-Tek 920403.
X
